02 · Stainless Steel
Stainless bars, sections and balustrade components
Imperial values are converted from metric; section and sheet designations stay metric.
02
Stainless Steel
Austenitic, ferritic and duplex stainless in flat, decorative, tubular and bar forms. Grades by AISI / ASTM with EN numbers.
SS-BSStainless Bars & Sections
Bar and section for brackets, fittings, machined parts and frames.
Grades 304 / 304L / 316 / 316L — ranges indicative
| Product | Standard | Typical range | Condition |
|---|---|---|---|
| Round bar | ASTM A276 · EN 10088-3 | Ø3–300 mmØ0.118–11.8 in | Bright drawn, peeled, ground |
| Square bar | ASTM A276 · EN 10088-3 | 5–100 mm0.197–3.94 in | Bright drawn or hot rolled |
| Hex bar | ASTM A276 · EN 10088-3 | 6–60 mm A/F0.236–2.36 in A/F | Bright drawn |
| Flat bar | ASTM A276 / A484 | 12×3 – 150×20 mm0.472×0.118 – 5.91×0.787 in | Hot rolled pickled or slit |
| Equal angle | ASTM A276 · EN 10088-3 | 20×20×3 – 100×100×10 | Hot rolled, pickled |
| Threaded rod | DIN 975 · ISO 3506 | M6–M24 | / A4-70 |
SS-BCBalustrade & Handrail Components
Posts, fixings and fittings for stainless and glass balustrades.
- Posts
- Round or square; drilled or slotted for infill
- Base fixings
- Base plates, flanges, side-fix brackets
- Glass fixings
- Clamps and spigots rated per glass build-up
- Handrail
- Brackets, elbows, end caps, joiners
- Infill
- Cross-bars, wire-rope kits, mesh panels
- Loads
- Check design loads (BS 6180 or local code)
SPECIFY ASSS-BC · 316 · round post 48.3 × 2.6 mm · 2 × clamps for 12 mm glass · base plate 100 × 100 × 8 · 320 grit · 40 sets
Austenitic stainless fastener (304-type) with 700 MPa minimum tensile strength, to ISO 3506-1. A4 is the 316-type equivalent.