05 · Perforated, Mesh & Grating
Welded and woven wire mesh and bar grating
Imperial values are converted from metric; section and sheet designations stay metric.
05
Perforated, Mesh & Grating
Perforated and expanded sheet, welded and woven mesh and bar grating for screens, guards, walkways and façades.
MG-WMWelded & Woven Wire Mesh
Infill, guards, fencing, screens and architectural mesh.
- Wire
- 0.8–6.0 mm · GI · SS 304 / 316 · PVC-coated0.031–0.236 in · GI · SS 304 / 316 · PVC-coated
- Aperture
- 6 × 6 – 100 × 100 mm0.236 × 0.236 – 3.94 × 3.94 in
- Galvanising
- Before or after welding — after is more durable
- Forms
- Rolls · flat panels · cut-to-size
- Woven
- SS architectural and industrial (ISO 9044)
MG-GRSteel & Stainless Bar Grating
Platforms, walkways, stair treads and trench covers.
- Bearing bar
- 25×3 – 65×5 mm (typical)0.984×0.118 – 2.56×0.197 in (typical)
- Pitch
- 30 / 34 / 40 mm bearing · 50 / 100 mm cross1.18 / 1.34 / 1.57 in bearing · 1.97 / 3.94 in cross
- Type
- Pressure-welded · press-locked
- Surface
- Plain · serrated (anti-slip)
- Finish
- HDG (ISO 1461 / ASTM A123) · SS 304 / 316
- Standards
- DIN 24537-1 · ANSI/NAAMM MBG 531
| Grating product | Supplied as | Specify |
|---|---|---|
| Stair treads | Banded, with nosing and end plates | Width, going, fixing holes |
| Trench covers | Banded panels with angle frames | Clear span, load class |
| Platforms & walkways | Banded panels with saddle clips | Panel layout, span direction |
SPECIFY ASMG-GR · S235JR · 30 × 3 mm bearing @ 34 mm · cross 100 mm · serrated · HDG ISO 1461 · 1000 × 5800 mm · 45 panels
Hot-dip galvanised: steel coated by immersion in molten zinc.