01 · Aluminium
Aluminium coil, coil-coated sheet and tread plate
Imperial values are converted from metric; section and sheet designations stay metric.
01
Aluminium
Rolled, extruded and composite aluminium for façade, architectural and general sheet-metal work. Alloys by EN AW / AA designation.
AL-CCAluminium Coil & Coil-Coated Sheet
Mill-finish and pre-painted coil for roll-forming, flashings and panels.
- Thickness
- 0.2–4.0 mm0.008–0.157 in
- Width
- To 2000 mm; slit from 20 mmTo 78.7 in; slit from 0.787 in
- Coil ID
- 405 · 505 · 508 · 610 mm15.9 · 19.9 · 20.0 · 24.0 in
- Alloys
- 1xxx · 3003 · 3105 · 5005 · 5754
- Colours
- RAL, NCS or project-matched
- Standards
- EN 1396 · EN 485 · ASTM B209
Coil coatings — fluoropolymers to AAMA 2605 · polyesters to EN 1396
| System | Resin basis | Durability | Typical use |
|---|---|---|---|
| PE | Polyester | Moderate | Interiors, ceilings, low-exposure trim |
| HDPE | High-durability polyester | Good | Soffits, fascias, rainwater goods |
| 2-coat | 70% PVDF resin | Excellent | Façade panels, copings, solid colours |
| PVDF 3-coat | 70% PVDF + clear coat | Excellent | Metallic, mica, high-chroma colours |
| Fluoropolymer (FEVE) | Excellent | High-gloss, vivid architectural colour |
AL-TPAluminium Tread Plate
Stair treads, ramps, vehicle floors, kick plates and wall protection.
- Pattern
- 5-bar · diamond · 1-bar
- Alloys
- 1050A · 3003 · 5052 · 5754
- Thickness
- 1.5–6.0 mm base plate0.059–0.236 in base plate
- Sizes
- 1250×2500 · 1500×3000 mm49.2×98.4 · 59.1×118 in
- Finish
- Mill · bright
SPECIFY ASAL-CC · EN AW-3105 H24 · 0.7 mm × 1250 mm coil · PVDF 2-coat RAL 7016 · ID 508 mm · AAMA 2605 · 5 t
Polyvinylidene fluoride coating. A 70 % PVDF resin system is the standard high-durability façade coating.
Fluoro-ethylene vinyl ether. A fluoropolymer coating that allows high gloss and vivid colours.