Aluminium extrusions
Standard profile shapes, which alloy to choose, and finish classes.
Imperial values are converted from metric; section and sheet designations stay metric.
- Profiles
- Angle, channel, tee, flat, bar, square / rect. / round tube, top-hat
- Custom
- To drawing; die cost and minimum run apply
- Length
- 6.0 m standard; cut-to-length19.7 ft standard; cut-to-length
- Standards
- EN 755-2 · EN 755-9 · EN 12020-2 · ASTM B221
- Profiles
- Angle, channel, tee, flat, bar, square / rect. / round tube, top-hat
- Custom
- To drawing; die cost and minimum run apply
- Length
- 6.0 m standard; cut-to-length19.7 ft standard; cut-to-length
- Standards
- EN 755-2 · EN 755-9 · EN 12020-2 · ASTM B221
SPECIFY ASAL-EX · EN AW-6063 T6 · RHS 50 × 25 × 2.0 mm · 6.0 m · powder coat Qualicoat class 2 RAL 9005 · 600 lengths
Enquire about Aluminium extrusions
Aluminium solution heat-treated and artificially aged for maximum strength (6000-series extrusions and plate).
Anodising quality: sheet produced with controlled chemistry and surface so it anodises to an even colour.
Polyvinylidene fluoride coating. A 70 % PVDF resin system is the standard high-durability façade coating.
North American performance specification for the highest-durability organic coatings on architectural aluminium.
International quality label for powder and liquid coatings on architectural aluminium; classes 1, 1.5, 2 and 3 by weathering performance.
International quality label for anodising; class numbers give the minimum average oxide thickness in µm (e.g. class 20 = 20 µm).
Trading
